Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

PDF

get fans

Description

Displays the status and attributes of the fans in the storage enclosure that are connected to chassis.
NOTE To use this subcommand, you must have the CMC Login User privilege.

Synopsis

racadm raid get fans -o -p Status
racadm raid get fans -o

Input

  • -o — The -o is used to display the fault-tolerant status of a enclosure.

Example

racadm raid get fans -o -p Status
Fan.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
racadm raid get fans -o
Fan.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 0
   Speed                            = 4620 RPMS
Fan.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 1
   Speed                            = 4620 RPMS
Fan.Slot.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 2
   Speed                            = 4490 RPMS
Fan.Slot.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 3
   Speed                            = 4560 RPMS
Fan.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 0
   Speed                            = 4670 RPMS
Fan.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 1
   Speed                            = 4670 RPMS
Fan.Slot.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 2
   Speed                            = 4670 RPMS
Fan.Slot.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 3
   Speed                            = 4700 RPMS

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\