Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Description

Synopsis

racadm raid get tempprobes -o -p Status
racadm raid get tempprobes -o

Input

• -o — The -o is used to display the fault-tolerant status of a enclosure.

Example

racadm raid get tempprobes -o -p Status

TempSensor.Embedded.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   Status                           = Ok
TempSensor.Embedded.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   Status                           = Ok
TempSensor.Embedded.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok
TempSensor.Embedded.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok
TempSensor.Embedded.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok
TempSensor.Embedded.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok

racadm raid get tempprobes -o

TempSensor.Embedded.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   Status                           = Ok
   State                            = Ready
   Name                             = Temp Sensor 2
   ReadingDegreeCelcius             = 29 C
   MinimumWarningThreshold          = 8 C
   MaximumWarningThreshold          = 45 C
   MinimumFailureThreshold          = 3 C
   MaximumFailureThreshold          = 55 C
TempSensor.Embedded.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   Status                           = Ok
   State                            = Ready
   Name                             = Temp Sensor 3
   ReadingDegreeCelcius             = 25 C
   MinimumWarningThreshold          = 10 C
   MaximumWarningThreshold          = 46 C
   MinimumFailureThreshold          = 3 C
   MaximumFailureThreshold          = 55 C
TempSensor.Embedded.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok
   State                            = Ready
   Name                             = Temp Sensor 0
   ReadingDegreeCelcius             = 32 C
   MinimumWarningThreshold          = -2 C
   MaximumWarningThreshold          = 65 C
   MinimumFailureThreshold          = -2 C
   MaximumFailureThreshold          = 65 C
TempSensor.Embedded.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok
   State                            = Ready
   Name                             = Temp Sensor 1
   ReadingDegreeCelcius             = 31 C
   MinimumWarningThreshold          = -2 C
   MaximumWarningThreshold          = 65 C
   MinimumFailureThreshold          = -2 C
   MaximumFailureThreshold          = 65 C
TempSensor.Embedded.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok
   State                            = Ready
   Name                             = Temp Sensor 2
   ReadingDegreeCelcius             = 27 C
   MinimumWarningThreshold          = 12 C
   MaximumWarningThreshold          = 50 C
   MinimumFailureThreshold          = 3 C
   MaximumFailureThreshold          = 55 C
TempSensor.Embedded.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   Status                           = Ok
   State                            = Ready
   Name                             = Temp Sensor 3
   ReadingDegreeCelcius             = 26 C
   MinimumWarningThreshold          = 13 C
   MaximumWarningThreshold          = 46 C
   MinimumFailureThreshold          = 3 C
   MaximumFailureThreshold          = 55 C