Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

getraclog


Description	The getraclog command displays RAC log entries.
Synopsis	racadm getraclog [-s <start>] [-c <count>]
Input	NOTE If no options are provided, the entire log is displayed. -c — Specifies the number of records to display. -s — Specifies the starting record used for the display. --more — Displays one screen at a time and prompts the user to continue.
Output	The default output display shows the record number, message ID, category, agent ID, severity, time stamp, message arg, and message. The timestamp begins at midnight, January 1, and increases until the system restarts. After the system restarts, the system’s timestamp is used. SeqNumber = 4 Message ID = CMC8550 Category = Audit AgentID = CMC Severity = Information Timestamp = 1982-03-21 05:33:35 Message Arg 1 = Healthy Message = Chassis health is Healthy
Example	Displays all the logs. racadm getraclog Displays 3 records from record number 5: racadm getraclog -s 5 -c 3