Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

netstat


Description	Displays the routing table and the current connections. To use this subcommand, you must have the Execute Diagnostic Commands privilege.
Synopsis	racadm netstat
Input	racadm netstat
Output	Kernel IPv6 routing table Destination Next Hop Flags Metric Ref Use Iface ::1/128 :: U 0 30 1 lo fe80::200:ff:fe00:d01/128 :: U 0 0 1 lo fe80::/64 :: U 256 0 0 eth1 ff00::/8 :: U 256 0 0 eth1 Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.0.1 0.0.0.0 255.255.255.0 U 0 0 0 bond0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 bond0 Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:8195 127.0.0.1:52887 ESTABLISHED tcp 0 0 127.0.0.1:199 127.0.0.1:52174 ESTABLISHED tcp 0 0 127.0.0.1:52175 127.0.0.1:199 ESTABLISHED tcp 0 0 127.0.0.1:199 127.0.0.1:52175 ESTABLISHED tcp 0 0 192.168.0.1:22 192.168.0.1:45106 ESTABLISHED tcp 0 0 127.0.0.1:52174 127.0.0.1:199 ESTABLISHED tcp 0 0 127.0.0.1:52887 127.0.0.1:8195 ESTABLISHED