Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

getioinfo

Table 1. getioinfoThe following table contains description, synopsis, and input of the getioinfo command.
Description	Displays general information about the I/O modules on the chassis. To use this subcommand, you must have the CMC Login User privilege. NOTE The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber Channel, and Infiniband.
Synopsis	racadm getioinfo racadm getioinfo [-m <module>] racadm getioinfo [-m <module>][-s]
Input	-m — Specifies the module or device. The <module> must be switch — <n>, where n = 1–2 -s — Displays the stack information.

Example

racadm getioinfo


<IO>	<Power>	<Name>	<Role>	<Mode>	<Type>	<Presence>	<POST>
switch-1	ON	R1-PT VRTX 1Gb Master	Pass-through	N/A	Gigabit Ethernet	Present	OK