Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

getdcinfo


Description	Displays general I/O module and daughter card configuration information. Only the CMC controls daughtercards. To use this subcommand, you must have the CMC Login User privilege. NOTE Fabric verification for server DCs is performed only when the chassis is turned on. When the chassis is on stand-by power, iDRACs on the server modules remain turned off and thus are unable to report the server's DC fabric type. The DC fabric type may not be reported in the CMC user interface until iDRAC on the server is turned on.
Synopsis	racadm getdcinfo
Input	-n — Displays the model names for the daughter cards in servers.

Example

The following example is for a system with multi-slot servers.

racadm getdcinfo

Group A I/O Type : Gigabit Ethernet

Group B I/O Type : PCIe

Group C I/O Type : PCIe


<IO#>	<Type>	<State>	<Role>
switch-1	Gigabit Ethernet	OK	Master


<Server#>	<Presence>	<DC1 Type>	<DC1 State>	<DC2 Type>	<DC2 State>
server-1	Present	PCIe	OK	PCIe	OK
server-2	Not Present	None	N/A	None	N/A
server-3	Present	PCIe	OK	None	N/A
server-4	Not Present	None	N/A	None	N/A

getdcinfo -n