Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

hotspare


Description	Assign or unassign global and dedicated hotspares.
Synopsis	racadm raid hotspare:<PD FQDD> -assign {yes \| no} {type {ghs \| dhs}} {-vdkey:<VD FQDD>} {-current \| -pending}
Input	–current <optional>: Performs the configuration right now. NOTE If this requires the system to reboot it will reboot then. –pending: Save the configuration change for a later application. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system reboots. –assign {yes \| no}: Assign or Unassign the physical disk drive as a hotspare. –type { ghs \| dhs} : Assign as a global or dedicated hotspare. –vdkey: <VD FQDD>: Required for dedicated hotspare. Assign the dedicated hotspare to the specified VD.
Example	racadm raid hotspare:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1 -assign no racadm raid hotspare:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1 -assign yes -type ghs racadm raid hotspare:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1 -assign yes -type dhs -vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.1-1