Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

PDF

set


Description	Import saved CMC configuration or CMC Event Filter configuration from a file. NOTE If CMC is not in the network, you cannot import the chassis configuration profile from a remote network share with proxy using the set command. But, you can import the chassis configuration profile from the local management station.
Synopsis	racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f <filename> racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f <filename> -t xml racadm set -f <filename> -t xml -u <username> -p <password> -l <CIFS share> racadm set -f <filename> -t xml -l <NFS share>
Input	-f: import CMC configuration or CMC event filter from a file. -u: username of the remote share from where the file must be imported. -p: password for the remote share from where the file must be imported. -l: network share location from where the file must be imported. -t: specify the file type to be imported. The valid value is “xml”. This option is case-sensitive.
Example	Configure event filter configurations from a configuration file using remote racadm racadm -r 192.168.0.120 -u <username> -p <password> set -f file.txt Configure a CMC from an XML configuration file on a local share using remote racadm racadm -r 192.168.0.120 -u <username> -p <password> set -f myfile.xml -t xml Configure a CMC from an XML configuration file on a remote CIFS share racadm set -f myfile.xml -t xml -u myuser -p mypass -l //192.168.0.0/myshare Configure a CMC from an XML configuration file on a remote NFS share racadm set -f myfile.xml -t xml -l 192.168.0.0:/myshare