IDPA ESXi 업그레이드가 실패하고 "[DependencyError]rn File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs" 오류 메시지가 표시됨

Summary: 이 KB 문서는 IDPA 업그레이드 중에 종속성 오류로 인해 ESXi 업그레이드가 실패하는 문제를 설명합니다.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms



ACM의 ESXi 업그레이드 로그에서 "/data01/tmp/patch/logs" 경로에 다음 오류가 표시될 수 있습니다.

6/03/20 17:23:16  main() Package name: IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:16  main() Executing install packages command: esxcli software profile update --depot=https://192.168.100.100:9443/dataprotection-upgrade/esxi_upgrade --profile=IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:19   run() Parsing returnCode, output: ['', "[DependencyError]\r\n File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])\r\n File path of '/opt/lsi/perccli/perccli' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])\r\n Please refer to the log file for more details.", 'Status: 1']
26/03/20 17:23:19 run_cmd_esxi() Command: esxcli software profile update --depot=https://192.168.100.100:9443/dataprotection-upgrade/esxi_upgrade --profile=IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:19 run_cmd_esxi() [DependencyError]
26/03/20 17:23:19 run_cmd_esxi()  File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])
26/03/20 17:23:19 run_cmd_esxi()  File path of '/opt/lsi/perccli/perccli' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])
26/03/20 17:23:19 run_cmd_esxi()  Please refer to the log file for more details.
26/03/20 17:23:19 run_cmd_esxi() Status: 1
26/03/20 17:23:19  main() Install packages command result: 1
26/03/20 17:23:19  main() Failed to install packages.

Cause

ESXi 호스트에 설치된 'vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01' VIB로 인해 이 문제가 발생합니다.

Resolution

1단계. SSH를 사용하여 해당 ESXi 호스트에 연결합니다.

2단계. 다음 명령을 실행하여 충돌하는 VIB를 제거합니다.
  • esxcli software vib remove --vibname vmware-perccli-007.0529.0000.0000
출력 예시:
[root@esx1:~]  esxcli software vib remove --vibname vmware-perccli-007.0529.0000.0000
Removal Result
Message: Operation finished successfully.
Reboot Required: false
VIBs Installed:
VIBs Removed: LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01
VIBs Skipped:

3단계. VIB가 성공적으로 제거되었는지 확인합니다.
  • esxcli software vib list|  grep -i perccli
참고: VIB가 성공적으로 제거된 경우 위 명령을 실행하면 빈 출력이 표시됩니다. 

4단계. ACM UI에서 ESXi 업그레이드를 재시도합니다. 

Affected Products

Integrated Data Protection Appliance Family

Products

PowerProtect DP5300, PowerProtect DP5800, PowerProtect DP8300, PowerProtect DP8800, PowerProtect Data Protection Software, Integrated Data Protection Appliance Family, PowerProtect Data Protection Hardware , Integrated Data Protection Appliance Software ...
Article Properties
Article Number: 000173292
Article Type: Solution
Last Modified: 27 May 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.