NWUI Postgresプロセスは、オペレーティング システムパッチのアップデート後にCPUリソースを100%消費する

Summary: NWUI Postgresプロセスは、オペレーティング システムのパッチアップデート後にCPUリソースを100%消費します。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

  • NWUI Postgresプロセスは、オペレーティング システムのパッチアップデート後にCPUリソースを100%消費します。
  • NWUIサーバーがLinuxプラットフォームにインストールされている。
  • NWUIサーバーのオペレーティング システム カーネルが3.10.0-1160.92.1.el7.x86_64から3.10.0-1160.99.1.el7.x86_64にアップデートされました。

Cause

パッチの更新により、NWUIデータベースの構成が混乱する可能性があります。

Resolution

新しいキーストアとデータベースを使用してNWUI構成を再初期化します。

1.NWUIサービスを停止します。systemctl stop nwui
2.次を実行:/opt/nwui/scripts/nwui_configure.sh
プロンプトが表示されたら、デフォルト設定を使用するか、値を入力します。

「Do you want to use the existing keystore "/nsr/nwui/monitoring/app/conf/nwui.keystore [y]?」というプロンプトが表示されたら、-- 「n」と答えます
キーストアのパスワードを入力するように求められます。同じキーストア パスワードを使用するか、新しいキーストアパスワードを割り当てることができます。

「A database already exists in /nsr/nwui/monitoring/nwuidb, do you want to retain this database [y]?:  「n」と---します。

プロンプト「/nsr/nwui/monitoring/nwuidb already exists, is ok to remove it [n]?」-- 「y」と答えます

3.NWUIサービスを開始します(まだ開始されていない場合)。systemctl start nwui
Article Properties
Article Number: 000218296
Article Type: Solution
Last Modified: 31 Oct 2023
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.