Dell VxRail: Failure occurred while running an upgrade for bundle: VXRAIL_COMPOSITE-7.X.XXXX_for_7.0.x.zip.

概要: The VxRail cluster was scheduled for the Upgrade and prechecks were green and no issue/alerts reported. However, after a couple of nodes, the upgrade failed with the following error message: Failure occurred while running an upgrade for bundle: VXRAIL_COMPOSITE-7.X.XXXX_for_7.0.x.zip. ...

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

現象

he VxRail Cluster upgrade was progressing and out of four nodes, one node was completed. While upgrading the second node, the upgrade script reported an error 
Failure occurred while running an upgrade for bundle: VXRAIL_COMPOSITE-7.0.451-28053212_for_7.0.x.zip. The error message: Failure occurred while scheduling firmware. The error message: FAILURE..

rtaImage.jpg

原因

There are stale entries in the iDRAC.

解決方法

To clear the stale entries, reboot the iDRAC on the VxRail node and restart the upgrade.

Steps: 
1. Login to the iDRAC page for the node when the cluster reported the issue.
2. Navigate to Maintenance
3. Click on Diagnostics and reboot iDRAC.
4. Wait for 10 minutes and restart the upgrade from the VxRail page. reboot iDRAC

その他の情報

This is a temporary workaround to get the upgrade complete. As a best practice from support, It is better to reboot the nodes and reboot of the iDRAC's before starting the upgrade.

対象製品

VxRail, VxRail 460 and 470 Nodes, VxRail Appliance Family, VxRail Appliance Series, VxRail D560, VxRail D560F, VxRail E Series Nodes, VxRail E460, VxRail E560, VxRail E560 VCF

製品

VxRail E560F, VxRail E560F VCF, VxRail E560N, VxRail E560N VCF, VxRail P470, VxRail P570, VxRail P570 VCF, VxRail P570F, VxRail P570F VCF, VxRail P580N, VxRail S Series Nodes
文書のプロパティ
文書番号: 000215929
文書の種類: Solution
最終更新: 26 7月 2023
バージョン:  1
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。