Gå til hovedindhold
Log af

Velkommen hos Dell

Min konto
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
Log på Opret en konto Log på Premier Log på Partnerprogram
Kontakt os

Dine Dell.com-kurve

Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual

PDF

Installing an expansion card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
  1. Ensure that you read the Safety instructions.
  2. Turn off the compute sled to which the expansion card is assigned.
  3. Remove the PCIe module.
  4. Open the expansion card release latch.
  5. Remove the filler bracket.

Steps

  1. Unpack the expansion card and prepare it for installation.
    For instructions, see the documentation shipped with the card.
  2. Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion card connector on the PCIe module.
  3. Insert the card-edge connector firmly into the expansion card connector until the card is fully seated.
  4. Close the expansion card release latch.

Next steps

  1. Install the PCIe module.
  2. Turn on the compute sled to which the expansion card is assigned.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\