Gå til hovedindhold
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).

Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual

PCIe slot mapping from compute sleds

In PowerEdge FX2s enclosure configurations that support only compute sleds, the PCIe slots are mapped to the compute sleds in the following manner:
  • Four-bay chassis—Each half-width compute sled is mapped to two PCIe slots.
  • Eight-bay chassis—Each quarter-width compute sled is mapped to one PCIe slot.
  • Six-bay chassis—Each quarter-width compute sled is mapped to one PCIe slot. Each half-width compute sled is mapped to two PCIe slots.
  • Two-bay chassis—Each full-width compute sled is mapped to four PCIe slots.
  • Three-bay chassis—The full-width compute sled is mapped to four PCIe slots. Each half-width compute sled is mapped to two PCIe slots.
Figure 1. Compute sled to PCIe slot mapping—four-bay chassis
This figure shows compute sled to PCIe slot mapping—four-bay chassis.
Figure 2. Compute sled to PCIe slot mapping—eight-bay chassis
This figure shows compute sled to PCIe slot mapping—eight-bay chassis.
Figure 3. Compute sled to PCIe slot mapping—six-bay chassis
This figure shows compute sled to PCIe slot mapping—six-bay chassis.
Figure 4. Compute sled to PCIe slot mapping—two-bay chassis
This figure shows compute sled to PCIe slot mapping—two-bay chassis.
Figure 5. Compute sled to PCIe slot mapping—three-bay chassis
This figure shows compute sled to PCIe slot mapping—three-bay chassis.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstĂĄ
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\