Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual

Removing an I/O module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: You must remove an I/O module to replace a faulty module or service other components of the system.

NOTE: An I/O module is hot-swappable.

Ensure that you read the Safety instructions.

Steps

Disconnect the cables attached to the I/O module.
Press the release latch and slide the I/O module out of the enclosure.
Figure 1. Removing and installing an I/O module
1. I/O module
2. I/O module handle
3. release latch

Next steps

Install the I/O module.

Velkommen

Velkommen hos Dell

Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual

Removing an I/O module

Prerequisites

Steps

Next steps

Bedøm indholdet