The 2U enclosure must be operated from a power supply input voltage range of 100–240
VAC, 50/60Hz.
The 5U enclosure must be operated from a power supply input voltage range of 200–240
VAC, 50/60Hz.
Provide a power
source with electrical overload protection to meet the requirements
in the technical specification.
The power cord must have
a safe electrical grounding connection. Check the grounding connection
of the enclosure before you switch on the power supply.
NOTE:The
enclosure must be grounded before applying power.
The plug on the power
supply cord is used as the main disconnect device. Ensure that the
socket outlets are located near the equipment and are accessible.
2U enclosures are intended
to operate with two PCMs.
5U84 enclosures are intended
to operate with two PSUs.
Follow the instructions that are shown on the power-supply disconnection caution label that is affixed to
power cooling modules.
CAUTION:Do not remove the covers from the enclosure or any
of the modules as there is a danger of electric shock inside.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\