Before beginning the enclosure installation, verify
that the site where you plan to install your storage system has the following:
Each redundant power
supply module requires power from an independent source or a rack
power distribution unit with Uninterruptible Power Supply (UPS). 2U
enclosures use standard AC power and the 5U84 enclosure requires high-line
(high-voltage) AC power.
A host computer configured
with the appropriate software, BIOS, and drives. Contact your supplier
for the correct software configurations.
Before installing the enclosure, verify the existence
of the following:
Depending upon the controller
module: SAS, Fibre Channel (FC), or iSCSI HBA and appropriate switches (if used)
Qualified cable options
for host connection
One power cord per PCM
or PSU
Rail kit (for rack installation)
Contact your supplier for a list of qualified
accessories for use with the enclosure. The accessories box contains
the power cords and other accessories.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\