Register a XenServer host with a software iSCSI adapter and create volumes
Perform the following steps to register a XenServer host with a software iSCSI adapter, and create volumes using the
PowerVault Manager:
-
Log in to the
PowerVault Manager.
-
Create initiators for the XenServer hosts.
-
From the Hosts topic, select
-
Type the iSCSI IQN that was specified for the XenServer host in
Configure the iSCSI IQN on a XenServer host.
-
Type a name for the initiator in the
Initiator Name field.
-
Select the initiator.
-
Select
.
The
Add to Host dialog box is displayed.
-
Type a hostname or select a host from the
Host Select field and click
OK.
-
Repeat the previous steps for all the XenServer hosts iSCSI IQNs.
-
Group hosts together with other hosts in a cluster.
-
Select the host to add to the host group.
-
Select
.
The
Add to Host Group dialog box is displayed.
-
Type a host group name or select a host group from the
Host Group Select field and click
OK.
-
Map the volumes to the host group.
-
Click the Volumes topic, select the volume to map.
If a volume does not exist, create a volume.
-
Select
.
The
Map dialog box is displayed.
-
Select the host group from the
Available Host Groups, Host, and Initiators area.
-
If not already selected, select the volumes from the
Available Volume Groups and Volumes area.
-
Click
Map.
-
Click
OK.
Data is not available for the Topic