CAUTION:Many repairs may only
be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation,
or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are
shipped with your product.
Follow the safety guidelines listed in the Safety
instructions section.
Follow the procedure listed in the Before working
inside your system section.
If applicable, remove the SD card.
NOTE:To use an
SD card with your system, ensure that the Internal SD Card
Port is enabled in System Setup.
Steps
Locate the SD card connector on the internal
dual SD module. Align the keyed end of the SD card into the slot and
insert the card into the slot
NOTE:The slot is keyed to ensure correct insertion of the card.
Press the card into the card slot to lock
it into place.
Next steps
Follow the procedure listed in the After working
inside your system section.
Enter System Setup and ensure that
the Internal SD Card Port is enabled.
Check if the new SD card is functioning
properly. If the problem persists, see the Troubleshooting an Internal
SD Card section.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\