Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7390 Owner's Manual

Removing LED board

  1. Follow the procedure in Before working inside your computer .
  2. Remove the :
    1. base cover

    2. battery

  3. To remove the LED board:
    1. Disconnect the LED cable from the system board [1].
      • CAUTION: Avoid pulling the cable as it would result in breaking the cable connector. Instead, use a scribe to release the LED cable from its connector.
    2. Unroute the LED cable from the routing channel [2].
    3. Remove the M2 x 2.5 (1) screw that secures the LED board to the computer [3]
    4. Lift the LED board from the computer [4].
    The image displays removing the LED board

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\