Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7390 Owner's Manual

Removing smart card cage

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. base cover

    2. battery

    3. PCIe SSD card

    4. SATA SSD

  3. To disconnect the smart card cable:
    1. Disconnect the smart card cable [1].
      • NOTE: Ensure to gently push the connector, to avoid damage to the smart card head.
    2. Lift the smart card cable that is affixed to the touchpad module [2].
      • NOTE: Ensure to pull gently to release it with adhesive tape.
    The image displays removing the smart card module
  4. To remove the smart card cage:
    • NOTE: To identify the number of screws, see screw list
    1. Remove the M2 x 3 screws (2) that secure the smart card cage to the computer [1].
    2. Slide and lift the smart card cage from the computer [2].
    The image displays to remove the smart card cage

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\