Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7390 Owner's Manual

Removing power connector port

  1. Follow the procedure in Before working inside your computer .
  2. Remove the :
    1. base cover

    2. battery

  3. To remove the power connector port:
    1. Disconnect the power connector port cable from the system board [1].
      • NOTE: Ensure to remove the adhesive tape that covers the connector.
      • NOTE: Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in breakage
    2. Remove the M2.0x3.0 screw (1) to release the metal bracket on the power connector port [2].
    3. Lift the metal bracket from the computer [3].
    4. Remove the power connector port from the computer [4].
    The image displays removing the power connector

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\