Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Latitude 7390 Owner's Manual

PDF

Removing speaker module

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. base cover

    2. battery

  3. To release the speaker module:
    1. Push to disconnect the speaker cable from the connector on the system board [1].
      • NOTE: Ensure to unroute the speaker cable from the routing clip.
      • NOTE: Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in breakage.
    2. Un-route the speaker cable from the routing clips [2].
    3. Remove the tape that secures the speaker cables to the touchpad board [3].
    The image displays removing the speaker module
  4. To remove the speaker module:
    1. Remove the M2.0x3.0 screws (4) that secure the speaker module to the computer [1].
    2. Lift the speaker module from the computer [2].
      • NOTE: Ensure to un-route the speaker cable from the routing clips.
    The image displays lifting the speaker

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\