Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge C4130 Owner's Manual

Installing the GPU brackets on the GPUs removed from your system

This procedure is not applicable to the AMD replacement GPUs because they are shipped without the I/O and support brackets. The Nvidia or Intel replacement GPUs are shipped with specific Nvidia or Intel I/O and support brackets. These brackets should be removed from the replacement Nvidia or Intel GPUs and installed on the Nvidia or Intel GPUs removed from your system. The procedure to install the Nvidia or Intel brackets on the GPUs removed from your system is identical.

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified service technicians.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Keep the Phillips #1, #2, and the Torx T6 screwdrivers ready.
  3. Remove the GPU brackets.

Steps

  1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
  2. Secure the I/O bracket to the GPU by using the screws.
  3. Align the screw holes on the support bracket with the screw holes on the GPU.
  4. Secure the support bracket to the GPU by using the screws.
    Figure 1. Installing the Nvidia GPU I/O brackets and the support brackets
    This figure shows installing the Nvidia GPU I/O brackets and the support brackets.
    1. Torx screw (2)
    2. support bracket
    3. GPU
    4. I/O bracket
    5. screw (5)
    Figure 2. Installing the Intel GPU I/O brackets and the support brackets
    This figure shows installing the Intel GPU I/O brackets and the support brackets.
    1. support bracket
    2. GPU
    3. screw (8)
    4. I/O bracket

Next steps

Install the custom GPU brackets on the replacement GPU.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\