Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge C4130 Owner's Manual

PDF

Removing a 1.8 inch uSATA SSD from a SSD carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Turn off the system, including any attached peripherals.
  3. Remove the SSD carrier from the SSD cage.

    NOTE: The SSD is installed in the SSD carrier.

Steps

  1. Turn the SSD carrier over.
  2. Pull the rails of the SSD carrier and lift the SSD out of the SSD carrier.
    Figure 1. Removing a 1.8 inch SSD into a SSD carrier
    This figure shows removal of a 1.8 inch SSD from a SSD carrier.
    1. SSD carrier
    2. SSD

Next steps

Install the SSD into the SSD carrier.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\