Dell PowerProtect Cyber Recovery 19.15 Command-Line Interface Reference Guide

Using the CRCLI commands

All CRCLI commands have the same basic structure.

crcli <module> <operation> <parameters> <arguments>

Where:

• <module> is the module name, for example users or policy.
• <operation> is the operation name, for example list, run, or show.
• <parameters> are one or more required and optional parameters.
• <arguments> are one or more required and optional arguments.

Note the following:

• Type each command on a single line, separating arguments with a space. Commands are lowercase and case-sensitive.
• To include a parameter, specify the parameter name or command-line flag followed by the parameter value:
  • Two dashes (--) precede the parameter name, as shown in the following example:

    crcli system logincount --userrole dashboard --maxcount 5

  • One dash (-) precedes the command-line flag, as shown in the following example:

    crcli system logincount -u dashboard -m 5

    NOTE:Ensure that you use only one character if you use abbreviated parameter names.
    Use the CRCLI help system to view the parameters and command-line flags.
• The order of the arguments is insignificant.