G5 5000 Service Manual

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component.

NOTE: Screw color may vary with the configuration ordered.

Table 1. Screw listScrew list
Component	Secured to	Screw type	Quantity	Screw image
LED daughter board	Chassis	M2x3	1
3.5-inch hard-drive assembly	Chassis	#6-32	1
3.5-inch hard drive	Hard-drive cage	#6-32	4
Wireless-card bracket	System board	M2x3	1
Solid-state drive/Intel Optane	System board	M2x3	1
LED daughter board	System board	M2x3	1
Power-supply unit cover	Chassis	#6-32	2
Power-supply unit	Chassis	#6-32	3
Ports bezel	Chassis	#6-32	1
Front I/O board	Chassis	#6-32	1
System board	Chassis	#6-32	8
System board	Chassis	M2x4	1