iDRAC is
supported on Internet Explorer, Mozilla Firefox, Google Chrome, and
Safari Web browsers. For information about the versions, see the Readme available at dell.com/support/manuals.
If you
are connecting to iDRAC Web interface from a management station that
connects to the Internet through a proxy server, you must configure
the Web browser to access the Internet from through this server. This
section provides information to configure Internet Explorer.
To configure the Internet Explorer Web browser:
Set IE to Run As Administrator.
In the Web browser, go to Tools > Internet Options > Security > Local Network.
Click Custom Level, select Medium-Low, and click Reset. Click OK to confirm. Click Custom Level to open the dialog.
Scroll down to the section labeled ActiveX controls and
plug-ins and set the following:
NOTE The settings
in the Medium-Low state depend on the IE version.
Automatic prompting for ActiveX controls: Enable
Binary and script behaviors: Enable
Download signed ActiveX controls: Prompt
Initialize and script ActiveX controls not marked as safe: Prompt
Run ActiveX controls and plug-ins: Enable
Script ActiveX controls marked safe for scripting: Enable
Under Downloads:
Automatic prompting for file downloads: Enable
File download: Enable
Font download: Enable
Under Miscellaneous:
Allow META-REFRESH: Enable
Allow scripting of Internet Explorer Web browser control: Enable
Allow script-initiated windows without size or position constraints:
Enable
Do not prompt for client certificate selection when no certificates
or only one certificate exists: Enable
Launching programs and files in an IFRAME: Enable
Open files based on content, not file extension: Enable
Display a notification about every script error: cleared
Enable Install On demand (Other): selected
Enable page transitions: selected
Enable third-party browser extensions: selected
Reuse windows for launching shortcuts: cleared
Under HTTP 1.1 settings:
Use HTTP 1.1: selected
Use HTTP 1.1 through proxy connections: selected
Under Java (Sun):
Use JRE 1.6.x_yz: selected (optional; version may differ)
Under Multimedia:
Enable automatic image resizing: selected
Play animations in Web pages: selected
Play videos in Web pages: selected
Show pictures: selected
Under Security:
Check for publishers' certificate revocation: cleared
Check for signatures on downloaded programs: selected
Use SSL 2.0: cleared
Use SSL 3.0: selected
Use TLS 1.0: selected
Warn about invalid site certificates: selected
Warn if changing between secure and not secure mode: selected
Warn if forms submittal is being redirected: selected
NOTE To
modify the settings, it is recommended that you learn and understand
the consequences. For example, if you block pop-ups, parts of iDRAC
Web interface may not function properly.
Click Apply, and then click OK.
Click the Connections tab.
Under Local Area Network (LAN) settings, click LAN Settings.
If you are using IE9 and IPv6 address to access iDRAC,
clear the Use automatic configuration script option.
If the Use a proxy server box is
selected, select the Bypass proxy server for local addresses box.
Click OK twice.
Close and restart your browser to make sure all changes
take effect.
NOTE When you log in to iDRAC Web interface using Internet
Explorer 9.x, sometimes contents in few pages are not shown properly.
To resolve this, press <F12>. In the Internet Explorer
9 Debug window, select Document Mode as Internet Explorer 7. The browser refreshes
and the iDRAC Login page is displayed.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\