Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 15 3511 Service Manual

Removing the display bezel

Prerequisites

  1. Follow the procedure in before working inside your computer.
  2. Remove the SD card.
  3. Enter service mode.
  4. Remove the base cover.
  5. Remove the display assembly.

About this task

The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.

image of removing the display bezel

Steps

  1. Use a plastic scribe to pry open the display bezel from the outer edge at the left and right sides of the display hinges.
    NOTE: The display bezel is adhered to the display panel with adhesive. Insert a plastic scribe into the recesses near both hinge caps to start the prying process to release the display bezel. Pry along the outside edge of the display bezel and work your way around the entire display bezel until the display bezel is separated from the display cover.

    Display bezel critical callout

  2. Carefully pry the bezel along the edges with your fingers.
    NOTE: Do not use a scribe or any other objects, and apply pressure to the display panel to avoid damaging the display panel.
  3. Work around the edge of the display assembly to pry the display bezel from the display assembly.
  4. Lift and remove the display bezel from the display assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\