Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 15 5510 Service Manual

PDF

Removing the I/O board

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Enter Service Mode.
  3. Remove the base cover.

About this task

The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.

Removing I/O board

Steps

  1. Remove the three (M2.5x4) screws that secure the left hinge to the palm-rest and keyboard assembly.
  2. Open the display hinge at an angle of 90 degrees.
  3. Open the latch, and disconnect the power button with optional fingerprint reader cable from the I/O board.
  4. Disconnect the coin-cell battery cable from the I/O board.
  5. Peel the tape that secures the I/O-board cable to the I/O board.
  6. Open the latch and disconnect the I/O-board cable from the I/O board.
  7. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
  8. Lift the I/O board off the palm-rest and keyboard assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\