Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

PDF

getraclog

Description

The getraclog command displays RAC log entries.

  • NOTE: When this command is run on Local RACADM, the data is available to RACADM as a USB partition and may display a pop-up message.
Synopsis 
racadm getraclog -s <start record> -c <count>
racadm getraclog [-c <count>] [-s <start-record>] [--more]
  • NOTE: If options are not provided, the entire log is displayed.
Input
  • -c — Specifies the number of records to display.
    • NOTE: On Local RACADM, the number of logs are restricted to 100 by default.
  • --more — Displays one screen at a time and prompts you to continue (similar to the UNIX more command).
  • -s — Specifies the starting record used for the display.
Output 
SeqNumber = 286
                                                Message ID = USR0005
                                                Category = Audit
                                                AgentID = RACLOG
                                                Severity = Information
                                                Timestamp = 2012-10-05 06:25:27
                                                Message = Login failed from processdisco06a: 10.92.68.245
                                                Message Arg 1 = processdisco06a
                                                Message Arg 2 = 10.92.68.245
                                                FQDD = iDRAC.Embedded.1
   
Example
Display the recent 2 records for RAC log 
racadm getraclog -c 
                                                   2 
                                                   SeqNumber = 4102
                                                   Message ID = LIC201
                                                   Category = Audit
                                                   AgentID = DE
                                                   Severity = Warning
                                                   Timestamp = 2014-06-12 01:38:19
                                                   Message = License yPMRJGuEf7z5HG8LO7gh assigned to device iDRAC expires in 4 days.
                                                   Message Arg 1 = yPMRJGuEf7z5HG8LO7ghMessage Arg 2 = iDRACMessage Arg 3 = 4
                                                   -----------------------------------------------------------------------------------
                                                   SeqNumber = 4101
                                                   Message ID = USR0032
                                                   Category = Audit
                                                   AgentID = RACLOG
                                                   Severity = Information
                                                   Timestamp = 2014-06-11 19:54:00
                                                   Message = The session for root from 10.94.98.92 using RACADM is logged off.
                                                   Message Arg 1 = root
                                                   Message Arg 2 = 10.94.98.92
                                                   Message Arg 3 = RACADM
                                                   FQDD = iDRAC.Embedded.1
                                                   -------------------------------------------------------------------------------------

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\