You can view total capacity, provisioned capacity, and writable capacity within the Cluster Capacity Performance report.
For this example, you are researching into the cluster's total data usage to determine if it is affecting performance on the cluster.
Click the
Performance Reporting tab.
On the
Live Performance Reporting page, click the
Cluster drop down and select the cluster that you want to monitor.
Click the
Report Type drop down and select
Cluster Capacity.
In the
Date Range fields, select a range to display, then click
View Report.
The date range should include the entire period of time when the cluster was behaving unexpectedly. The default setting is to view the last hour of data.
The modules in the report are now populated with data for the cluster and date range you selected.
In the
Cluster Capacity module, check the total capacity and compare to the total usage during the time in question.
NOTE: If the total usage is close to the total capacity, you might be close to filling up the cluster. For more detailed information, view the
Capacity Reporting page under the
File System Reporting tab.
With the information you gathered, you can determine how close you are to reaching the cluster's total capacity and estimate when additional capacity might be needed.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\