Dell InsightIQ 4.3.0.0 User Guide

PDF

Filter rules

Rules for InsightIQ filters.

To define a filter rule, specify the match parameter. For some rules, InsightIQ automatically generates a list of valid parameters. For other filters, type a valid parameter.

NOTE: If InsightIQ is monitoring a cluster with OneFS 8.2 or later, the statistics, breakouts, filters, and report data might not display properly.

Input values for the following Data Filter rules.

Table 1. Data Filter rules that require an input parameter
Filter	Match value
Client	The IP address of a client. To filter by all clients exceeding the top 1000 for a particular Performance module, specify `Other clients`
Node Pool	The name of a node pool on the cluster.
Directory	The path of a directory within /ifs. For example, /ifs/data/media The backslash character (\) is not valid.
File Extension	The file name extension. For example .xml To filter files without file name extensions, specify the following: (none) The backslash character (\) is not valid.
Job ID	The numeric ID of a job. For example, 5
Path	The path of a directory within /ifs. For example, /ifs/data/media The backslash character (\) is not valid.
User Attribute	The name of a user attribute that is defined on the cluster. All characters are valid. Only available in the File System reports.

You can select conditional values for the following Filter rules.

Table 2. Filter rules that allow conditional values
Filter	Condition values	Description
Accessed Time	0 sec - 1 min	Includes only files that were accessed 0 seconds to 1 minute ago.
	1 min - 1 hour	Includes only files that were accessed 1 minute to 1 hour ago.
	1 hour - 1 day	Includes only files that were accessed 1 hour to 1 day ago.
	1 day - 7 days	Includes only files that were accessed 1 day to 7 days ago.
	7 days - 30 days	Includes only files that were accessed 7 days to 30 days ago.
	30 days - 60 days	Includes only files that were accessed 30 days to 60 days ago.
	60 days - 90 days	Includes only files that were accessed 60 days to 90 days ago.
	90 days - 180 days	Includes only files that were accessed 90 days to 180 days ago.
	180 days - 1 year	Includes only files that were accessed 180 days to 1 year ago.
	1 year - 2 years	Includes only files that were accessed 1 year to 2 years ago.
	2 years - Infinity	Includes only files that were accessed 2 years ago and older.
Direction	In	Includes only information that is related to inbound cluster traffic.
Direction	Out	Includes only information that is related to outbound cluster traffic.
Disk	`<devid>`/Bay `<number>`	Includes only information that is related to the specified disk.
FS Event	blocked	Includes only information that is related to blocked file system events.
	contended	Includes only information that is related to contended file system events.
	deadlocked	Includes only information that is related to deadlocked file system events.
	getattr	Includes only information that is related to get attribute events.
	link	Includes only information that is related to linking events.
	lock	Includes only information that is related to locking events.
	lookup	Includes only information that is related to lookup events.
	read	Includes only information that is related to read events.
	rename	Includes only information that is related to rename events.
	setattr	Includes only information that is related to set attribute events.
	unlink	Includes only information that is related to unlinking events.
	write	Includes only information that is related to write events.
Interface	`<devid>`/`<type>`	Includes only information that is related to the specified interface.
Job Type	AVScan	Includes only information that is related to the AVScan job engine job.
	AutoBalance	Includes only information that is related to the AutoBalance job engine job.
	AutoBalanceLin	Includes only information that is related to the AutoBalanceLin job engine job.
	ChangelistCreate	Includes only information that is related to the ChangelistCreate job engine job.
	Collect	Includes only information that is related to the Collect job engine job.
	Dedupe	Includes only information that is related to the Dedupe job engine job.
	DedupeAssessment	Includes only information that is related to the DedupeAssessment job engine job.
	DomainMark	Includes only information that is related to the DomainMark job engine job.
	FSAnalyze	Includes only information that is related to the FSAnalyze job engine job.
	FlexProtect	Includes only information that is related to the FlexProtect job engine job.
	FlexProtectLin	Includes only information that is related to the FlexProtectLin job engine job.
	IntegrityScan	Includes only information that is related to the IntegrityScan job engine job.
	MediaScan	Includes only information that is related to the MediaScan job engine job.
	MultiScan	Includes only information that is related to the MultiScan job engine job.
	PermissionRepair	Includes only information that is related to the PermissionRepair job engine job.
	QuotaScan	Includes only information that is related to the QuotaScan job engine job.
	SetProtectPlus	Includes only information that is related to the SetProtectPlus job engine job.
	ShadowStoreDelete	Includes only information that is related to the ShadowStoreDelete job engine job.
	ShadowStoreProtect	Includes only information that is related to the ShadowStoreProtect job engine job.
	SmartPools	Includes only information that is related to the SmartPools job engine job.
	SnapRevert	Includes only information that is related to the SnapRevert job engine job.
	SnapshotDelete	Includes only information that is related to the SnapshotDelete job engine job.
	TreeDelete	Includes only information that is related to the TreeDelete job engine job.
	WormQueue	Includes only information that is related to the WormQueue job engine job.
Logical Size	0 B - 8 KB	Includes only files that have a logical size of 0 B to 8 KB.
	8 KB - 128 KB	Includes only files that have a logical size of 8 KB to 128 KB.
	128 LB - 1 MB	Includes only files that have a logical size of 128 KB to 1 MB.
	1 MB - 10 MB	Includes only files that have a logical size of 1 MB to 10 MB.
	10 MB - 100 MB	Includes only files that have a logical size of 10 MB to 100 MB.
	100 MB - 1 GB	Includes only files that have a logical size of 100 MB to 1 GB.
	1 GB - 10 GB	Includes only files that have a logical size of 1 GB to 10 GB.
	10 GB - 100 GB	Includes only files that have a logical size of 10 GB to 100 GB.
	100 GB - 1 TB	Includes only files that have a logical size of 100 GB to 1 TB.
	1 TB - ∞	Includes only files that have a logical size of 1 TB to ∞.
Changed Time	0 sec - 1 min	Includes only files that have been changed 0 seconds to 1 minute ago.
	1 min - 1 hour	Includes only files that have been changed 1 minute to 1 hour ago.
	1 hour -1 day	Includes only files that have been changed 1 hour to 1 day ago.
	1 day - 7 day	Includes only files that have been changed 1 day to 7 day ago.
	7 days - 30 days	Includes only files that have been changed 7 days to 30 days ago.
	30 days - 60 days	Includes only files that have been changed 30 days to 60 days ago.
	60 days - 90 days	Includes only files that have been changed 60 days to 90 days ago.
	90 days -180 days	Includes only files that have been changed 90 days to 180 days ago.
	180 days - 1 year	Includes only files that have been changed 180 days to 1 year ago.
	1 year - 2 years	Includes only files that have been changed 1 year to 2 years ago.
	2 years - Infinity	Includes only files that were accessed 2 years ago and older.
Node	`<integer>`	Includes only information that is related to the node with the specified LNN.
Node (Device ID)	`<integer>`	Includes only information that is related to the node with the specified device ID.
Op Class	create	Includes only information that is related to file create operations.
	delete	Includes only information that is related to file delete operations.
	file_state	Includes only information that is related to file access operations, such as open, close, lock, and unlock.
	namespace_read	Includes only information that is related to namespace read operations
	namespace_write	Includes only information that is related to write operations.
	other	Includes only information that is related to operations that do not fit in to any other operation class category.
	read	Includes only information that is related to file read operations.
	session_state	Includes only information that is related to operations that control session access, such as connect, disconnect, login, and logout.
	write	Includes only information that is related to file write operations.
Physical Size	0 B - 8 KB	Includes only files that have a logical size of 0 B to 8 KB.
	8 KB - 128 KB	Includes only files that have a logical size of 8 KB - 128 KB.
	128 KB - 1 MB	Includes only files that have a logical size of 128 LB - 1 MB.
	1 MB - 10 MB	Includes only files that have a logical size of 1 MB - 10 MB.
	10 MB - 100 MB	Includes only files that have a logical size of 10 MB - 100 MB.
	100 MB - 1 GB	Includes only files that have a logical size of 100 MB - 1 GB.
	1 GB - 10 GB	Includes only files that have a logical size of 1 GB - 10 GB.
	10 GB - 100 GB	Includes only files that have a logical size of 10 GB - 100 GB.
	100 GB - 1 TB	Includes only files that have a logical size of 100 GB - 1 TB.
	1 TB - ∞	Includes only files that have a logical size of 1 TB - ∞.
Protocol	ftp	Includes only information that is related to FTP.
	hdfs	Includes only information that is related to HDFS.
	http	Includes only information that is related to HTTP.
	nfs	Includes only information that is related to NFS.
	nfs3	Includes only information that is related to NFS3.
	nfs4	Includes only information that is related to NFS4.
	nlm	Includes only information that is related to NLM.
	papi	Includes only information that is related to PAPI.
	siq	Includes only information that is related to SyncIQ.
	smb	Includes only information that is related to SMB.
	smb1	Includes only information that is related to SMBv1.
	smb2	Includes only information that is related to SMBv2.