Latitude 5591 Service Manual

Removing the M.2 Solid State Drive - SSD

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. base cover
   2. battery
3. To remove the SSD:
   1. Touch: Remove the one M2x3 screw [1] that secures the SSD bracket to the laptop and lift the SSD frame [2] that secures the SSD card to the system board. .
      NOTE Peel off the adhesive tape that is placed above the SSD card and remove the screw (1), for Non-Touch systems.

      For models shipped with NVMe SSDs, remove the thermal plate placed over the SSD.

   2. Remove the SSD frame that secures the SSD card to the system board [2].
   3. Lift and pull the SSD card from the laptop [3].
   NOTE For models shipped with NVMe SSDs, remove the thermal plate placed over the SSD.
   
4. To remove the SSD clip -Touch and Non-touch :
   1. Remove the M2x3 screw that secures the SSD clip to the laptop [1].
   2. Lift the SSD clip away from the laptop [2].