Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 5591 Service Manual

Removing the touchpad button board

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. base cover
    2. battery
    3. WLAN card
    4. WWAN card
    5. SSD cardor hard drive
    6. chassis frame
  3. To release the touchpad button board:
    1. Lift the latch and disconnect the SmartCard reader cable from the connector on the system board [1].
    2. Peel off the SmartCard reader cable from the adhesive [2].
      The image displays to remove Touchpad cables
  4. To remove the touchpad button board:
    1. Lift the latch and disconnect the touchpad button board cable from the connector on the system board [1].
    2. Remove the M2x3 screws (2) that secure the touchpad button board to the laptop [2].
    3. Lift the touchpad button board away from the laptop [3].
    The image displays to remove Touchpad pannel

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\