Use this page to configure remote access parameters
for iDRAC.
From the IP Address Source menu, select one of the following options:
Static — indicates that the network must be configured
by using a static IP. Type the IP Address Properties such as IP Address, Subnet Mask, Default Gateway, DNS Address Source, and
DNS Address. If you do not have this information, contact
your network administrator.
DHCP — Indicates that the network must be configured
by using an IP address from a DHCP server. If DHCP is selected, a
DHCP IP address is displayed on the Network Settings page.
Enter the following credentials:
Account Username— The user
name to access iDRAC network
Password— The password
to access iDRAC network
Confirm Password— The password
to access iDRAC network
Click Next
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\