iDRAC 8/7 v2.70.70.70 RACADM CLI Guide

PDF

getsysinfo

Table 1. Details of attributeThe following table provides details of attribute:
Description	Displays information related to iDRAC, managed system, and watchdog configuration. Displays information related to CMC, managed system, and watchdog configuration. NOTE: : The host name and OS Name fields in the getsysinfo output display accurate information only if the Dell OpenManage Server Administrator is installed on the managed system. Else, these fields may be blank or inaccurate. An exception to this are VMware operating system names, which are displayed even if the Server Administrator is not installed on the managed system.
Synopsis	racadm getsysinfo [-d] [-A] [-c] [-4] [-6]
Input	—4 — Displays IPv4 settings —6 — Displays IPv6 settings —c — Displays common settings —d — Displays iDRAC information —d — Displays CMC information —A — Eliminates the printing of headers or labels

Output

racadm getsysinfo
CMC Information:
CMC Date/Time             = Wed Sep 17 2014 23:13
Primary CMC Location        = CMC-1
Primary CMC Version      = 5.00
Standby CMC Version      = 5.00
Last Firmware Updated    = Tue Sep 16 2014 22:11
Hardware Version         = A09

CMC Network Information:
NIC Enabled             = 1
MAC Address             = 78:2B:CB:46:5C:8A
Register DNS CMC Name   = 1
DNS CMC Name            = cmc-effort
Current DNS Domain      = cmc.com
VLAN ID                 = 1
VLAN Priority           = 0
VLAN Enabled            = 0

CMC IPv4 Information:
IPv4 Enabled            = 1
Current IP Address      = 192.168.0.10
Current IP Gateway      = 192.168.0.10
Current IP Netmask      = 255.255.255.0
DHCP Enabled            = 1
Current DNS Server 1    = 0.0.0.0
Current DNS Server 2    = 0.0.0.0
DNS Servers from DHCP   = 0

CMC IPv6 Information:
IPv6 Enabled            = 0
Autoconfiguration Enabled = 0
Link Local Address      = ::
Current IPv6 Address 1  = ::
Current IPv6 Gateway    = ::
Current IPv6 DNS Server 1 = ::
Current IPv6 DNS Server 2 = ::
DNS Servers from DHCPv6  = 0

Chassis Information:
System Model            = PowerEdge M1000e
System AssetTag         = 12345678901234567890123456781234456771234567890asvcdefrtghyhytg
Service Tag             = JGB6B2S
Chassis Name            = CMC-JGB6B2S
Chassis Location        = 3rdflor
Chassis Midplane Version= 1.1
Power Status            = ON

Output

RAC Information:
RAC Date/Time           = Thu Sep  3 17:25:06 2015

Firmware Version        = 2.20.20.20
Firmware Build          = 41
Last Firmware Update    = 09/02/2015 22:18:35
Hardware Version        = 0.01
MAC Address             = B8:2A:72:FC:4F:B0

Common settings:
Register DNS RAC Name   = 1
DNS RAC Name            = ipmierrata
Current DNS Domain      = sha512.com
Domain Name from DHCP   = Disabled

IPv4 settings:
Enabled                 = 1
Current IP Address      = 10.94.195.33
Current IP Gateway      = 10.94.195.1
Current IP Netmask      = 255.255.255.0
DHCP Enabled            = 1
Current DNS Server 1    = 10.94.192.67
Current DNS Server 2    = 0.0.0.0
DNS Servers from DHCP   = Disabled

IPv6 settings:
Enabled                 = 1
Current IP Address 1    = 2011:de11:bdc:195::16e/64
Current IP Gateway      = fe80::21c:23ff:fe6a:1106
Autoconfig              = 1
Link Local IP Address   = fe80::ba2a:72ff:fefc:4fb0/64
Current IP Address 2    = ::
Current IP Address 3    = ::
Current IP Address 4    = ::
Current IP Address 5    = ::
Current IP Address 6    = ::
Current IP Address 7    = ::
Current IP Address 8    = ::
Current IP Address 9    = ::
Current IP Address 10   = ::
Current IP Address 11   = ::
Current IP Address 12   = ::
Current IP Address 13   = ::
Current IP Address 14   = ::
Current IP Address 15   = ::
DNS Servers from DHCPv6 = Disabled
Current DNS Server 1    = 2011:de11:bdc:192::67/64
Current DNS Server 2    = ::

System Information:
System Model            = PowerEdge R630
System Revision         = I
System BIOS Version     = 1.3.6
Service Tag             = 62T3232
Express Svc Code        = 13230477902
Host Name               = WIN-2TA05N3JSLD
OS Name                 = Microsoft Windows Server 2008 R2, Enterprise x64 Edition
OS Version              = Version 6.1 (Build 7601 : Service Pack 1) (x64) Server Full In
Power Status            = OFF
Fresh Air Capable       = Yes

Example

Display systemChassis information
```
racadm getsysinfo -c
```
Display iDRACCMC information
```
racadm getsysinfo -d
```

Display IPv4 details without header

racadm getsysinfo -A

"RAC IPv4 Information:"
"1"
"10.94.195.33"
"10.94.195.1"
"255.255.255.0"
"1"
"10.94.192.67"
"0.0.0.0"
"1"

"CMC IPv4 Information:"
"1"
"192.168.0.10"
"192.168.0.10"
"255.255.255.0"
"1"
"192.168.0.10"
"0.0.0.0"
"1"