- Notes, cautions, and warnings
- Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Dell HBA355i Adapter
- Dell HBA355i Front
- Dell HBA355e Adapter
- Dell HBA350i MX
- Dell HBA350i Adapter
- Dell HBA350i MM
- Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM technical specifications
- PowerEdge systems supported by Dell HBA355i Adapter
- PowerEdge systems supported by Dell HBA355i Front
- PowerEdge systems supported by Dell HBA355e Adapter
- PowerEdge systems supported by Dell HBA350i MX
- PowerEdge systems supported by Dell HBA350i Adapter
- PowerEdge systems supported by Dell HBA350i MM
- Operating systems supported by Dell HBA355i Adapter cards
- MD1400 and MD1420 enclosure support for Dell HBA355e Adapter
- Port support matrix for dual path on the MD1400 and MD1420 enclosures
- ME484 enclosure support for Dell HBA355e Adapter
- Port support matrix for dual path on the ME484 enclosure
- MD24xx enclosure supported by Dell HBA355e Adapter
- Supported Cable Configurations
- External tape drive support for Dell HBA355e Adapter
- Internal tape drive support for Dell HBA355i Adapter and Dell HBA350i Adapter
- Applications supported by Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Multipath support on Dell HBA355e Adapter
- Features of Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Installation and removal of cards
- Safety instructions
- Before working inside your system
- Remove the Dell HBA355i Adapter
- Install the Dell HBA355i Adapter
- Remove the Dell HBA355i Front
- Install the Dell HBA355i Front
- Remove the Dell HBA355e Adapter
- Install the Dell HBA355e Adapter
- Connect the Dell HBA355e Adapter to the storage enclosure
- Connect an HBA355e adapter to MD24xx enclosures
- Remove the Dell HBA350i MX
- Install the Dell HBA350i MX
- Remove the Dell HBA350i Adapter
- Install the Dell HBA350i Adapter
- Remove Dell HBA350i MM
- Install the HBA350i MM
- Driver support for Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Creating the device driver media
- Download and save Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM drivers from the support site
- Download and save Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM drivers from the Dell Systems Service and Diagnostic Tools
- Windows driver installation
- Install Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM drivers while newly installing the Windows Server 2016 or later
- Install Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM, driver on which the Windows Server 2016 or later is already installed
- Update Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM driver that runs on Windows Server 2016 or later
- Linux driver installation
- Load the driver while installing an operating system
- Creating the device driver media
- Manage Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM using HII configuration utility
- Update the firmware of Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM using DUP
- Getting help
- Troubleshooting
- Known issues
- The Enclosure ID (EID) or Device ID (DID) may change after a restart
- VendorID and ProductID for external tape drives
- VendorID and ProductID for internal tape drives
- System reserved partition after Windows installation
- Device settings in HII shows PCIe slot information
- Select drive for operating system installation in legacy mode
- Adapter configuration change message
- Firmware upgrade or downgrade from DUP is not supported on Ubuntu
- Known issues
- Documentation resources
Dell Host Bus Adapter User's Guide HBA 355 and 350 Series
Supported Cable Configurations
- Connect to the JBOD EMM by using SAS4 cables only.
- Redundant cable configurations only:
- Both EMMs must be cabled to the PERC or HBA in a server to properly manage the JBOD.
- All elements cannot be monitored in single cable configuration. For example, fans, temperature, and probes.
- Firmware of both EMMs cannot be upgraded in a single cable configuration. Peer update functionality is unavailable in JBOD.
- DUP supports only dual cable configurations.
- Symmetrical cable configurations only:
- Chain configurations do not support asymmetrical cabling. All cables will run top to bottom or bottom to top in a stack.
- Mixing of enclosures in chain configuration is not supported:
- You must connect enclosures of same model only. For example, an MD2412 can be daisy-chained only to an MD2412 enclosure.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\