- Notes, cautions, and warnings
- Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Dell HBA355i Adapter
- Dell HBA355i Front
- Dell HBA355e Adapter
- Dell HBA350i MX
- Dell HBA350i Adapter
- Dell HBA350i MM
- Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM technical specifications
- PowerEdge systems supported by Dell HBA355i Adapter
- PowerEdge systems supported by Dell HBA355i Front
- PowerEdge systems supported by Dell HBA355e Adapter
- PowerEdge systems supported by Dell HBA350i MX
- PowerEdge systems supported by Dell HBA350i Adapter
- PowerEdge systems supported by Dell HBA350i MM
- Operating systems supported by Dell HBA355i Adapter cards
- MD1400 and MD1420 enclosure support for Dell HBA355e Adapter
- Port support matrix for dual path on the MD1400 and MD1420 enclosures
- ME484 enclosure support for Dell HBA355e Adapter
- Port support matrix for dual path on the ME484 enclosure
- MD24xx enclosure supported by Dell HBA355e Adapter
- Supported Cable Configurations
- External tape drive support for Dell HBA355e Adapter
- Internal tape drive support for Dell HBA355i Adapter and Dell HBA350i Adapter
- Applications supported by Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Multipath support on Dell HBA355e Adapter
- Features of Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Installation and removal of cards
- Safety instructions
- Before working inside your system
- Remove the Dell HBA355i Adapter
- Install the Dell HBA355i Adapter
- Remove the Dell HBA355i Front
- Install the Dell HBA355i Front
- Remove the Dell HBA355e Adapter
- Install the Dell HBA355e Adapter
- Connect the Dell HBA355e Adapter to the storage enclosure
- Connect an HBA355e adapter to MD24xx enclosures
- Remove the Dell HBA350i MX
- Install the Dell HBA350i MX
- Remove the Dell HBA350i Adapter
- Install the Dell HBA350i Adapter
- Remove Dell HBA350i MM
- Install the HBA350i MM
- Driver support for Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM
- Creating the device driver media
- Download and save Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM drivers from the support site
- Download and save Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM drivers from the Dell Systems Service and Diagnostic Tools
- Windows driver installation
- Install Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM drivers while newly installing the Windows Server 2016 or later
- Install Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM, driver on which the Windows Server 2016 or later is already installed
- Update Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM driver that runs on Windows Server 2016 or later
- Linux driver installation
- Load the driver while installing an operating system
- Creating the device driver media
- Manage Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM using HII configuration utility
- Update the firmware of Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, Dell HBA350i Adapter, and Dell HBA350i MM using DUP
- Getting help
- Troubleshooting
- Known issues
- The Enclosure ID (EID) or Device ID (DID) may change after a restart
- VendorID and ProductID for external tape drives
- VendorID and ProductID for internal tape drives
- System reserved partition after Windows installation
- Device settings in HII shows PCIe slot information
- Select drive for operating system installation in legacy mode
- Adapter configuration change message
- Firmware upgrade or downgrade from DUP is not supported on Ubuntu
- Known issues
- Documentation resources
Dell Host Bus Adapter User's Guide HBA 355 and 350 Series
Install the HBA350i MM
Prerequisites
CAUTION: Many repairs may only
be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation,
or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are
shipped with your product.
Steps
- Angle the storage controller card and align the end of the card with the controller card connector on the system.
- Lower the connector side of the storage controller card into the storage controller card connector on the system board.
NOTE: Ensure that the slots on the system board align with the screw holes on the storage controller card connector.
Figure 1. Install Dell HBA350i MM 
- Route the storage controller card cable along the wall of the system.
- Align the screws on the storage controller card cable with the screw holes on the connector.
- Using Phillips #2 screwdriver, tighten the screws to secure the storage controller card cable to the card connector on the system board.
Figure 2. Install the cable 
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\