Dell Host Bus Adapter User's Guide HBA 355 and 350 Series

Enter the HII configuration utility

1. To view System Setup, power on the system, press F2, and click System Setup Main Menu.
   The System Setup Main Menu screen details are described as follows:

   Table 1. System setup menuThis table describes the system setup main menu screen details.

   Option	Description
   System BIOS	Configure BIOS settings.
   iDRAC Settings	The iDRAC settings utility is an interface that is used to set up and configure the iDRAC parameters by using Unified Extensible Firmware Interface (UEFI). You can enable or disable various iDRAC parameters by using the iDRAC settings utility. For more information about this utility, see the iDRAC user's guide at https://www.dell.com/poweredgemanuals
   Device Settings	Configure device settings for devices such as storage controllers and network cards.

2. Click Device Settings.

   To access the management menu for the controller, use the arrow keys or the mouse.

   NOTE: For more information these options, click Help on the upper-right corner of the browser screen.