Dell PowerStore Installation and Service Guide for PowerStore 1000, 1200, 3000, 3200, 5000, 5200, 7000, 9000, and 9200

Identify a faulted DIMM from PowerStore Manager

Before you replace a DIMM, ensure that you have identified its location within the system. Using PowerStore Manager, you can identify and locate a faulted DIMM.

1. From PowerStore Manager, select Hardware.
2. Select the appliance that includes the DIMM that you need to replace.
3. On the Components card, under Internal View, expand ExpansionEnclosure.
4. Select the relevant DIMM.
   Faulted parts appear in red in the image of the system, and report a status of Faulted in the State field.
5. You can also identify a faulted DIMM by using the following commands:
   To display the DIMM information:

    svc_diag list --expansion_hardware --sub_option dimm

   To display the status of the NVMe expansion enclosure:

   svc_diag list --expansion_hardware --sub_option status

   To display the verbose output of all of the hardware in the NVMe expansion enclosure including health and status.

   svc_diag list --expansion_hardware

   NOTE:The svc_diag list command takes a few minutes to run.