Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerVault ME4 Series Storage System Administrator’s Guide

PDF

Rear view

The Rear tab shows the rear of all enclosures in a graphical view.

The rear view shows enclosure IDs and the presence or absence of power supplies, controller modules, and expansion modules. It also shows controller module IDs, host port types and names, network port IP addresses, and expansion port names.

To see more information, hover the cursor over an enclosure ear or a component. To illuminate a locator LED for any of the components, select one or more components and click Turn On LEDs. To turn off individual locator LEDs, select the components and click Turn Off LEDs. To turn off all locator LEDs, ensure that no components are selected and click Turn Off LEDs. For a 5U84 enclosure, only enclosures, I/O modules, and disks are selectable.

NOTE:Protocol-specific properties are displayed only for host ports that use those protocols.
Table 1. Additional information panels for the rear view of the enclosureAdditional information panels for the rear view of the enclosure
Panel Information displayed
Enclosure Information ID, status, vendor, model, disk count, WWN, midplane serial number, revision, part number, manufacturing date, manufacturing location, EMP A revision, EMP B revision, EMP A bus ID, EMP B bus ID, EMP A target ID, EMP B target ID, midplane type, enclosure power (watts), PCIe 2-capable, health
Power Supply Information Status, vendor, model, serial number, revision, location, part number, manufacturing date, manufacturing location, health
Controller Information ID, IP address, description, status, model, serial number, hardware version, system cache memory (MB), revision, CPLD version, Storage Controller code version, Storage Controller CPU type, part number, position, hardware version, manufacturing date, manufacturing location, health
Port Information (FC) Name, type, ID (WWN), status, configured speed, actual speed, topology, primary loop ID, supported speeds, SFP status, part number, health
Port Information (iSCSI) Name, type, ID (IQN), status, configured speed, actual speed, IP version, MAC address, address, gateway, netmask, SFP status, part number, 10G compliance, cable length, cable technology, Ethernet compliance, health
Port Information (SAS) Name, type, ID (WWN), status, actual speed, topology, expected lanes, active lanes, disabled lanes, health
Network Information Name, mode, IP address, network mask, gateway, MAC address, health
Expansion Port Information Enclosure ID, controller ID, name, status, health
Expansion Module Information (IOM) ID, description, serial number, revision, health

If the health of a component is not OK, the health reason, recommended action, and unhealthy subcomponents are shown to help you resolve problems.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\