- Notes, cautions, and warnings
- Getting started
- System concepts
- Storage environment
- Virtual storage
- Linear storage
- Disk groups
- RAID levels
- ADAPT
- Disk group utilities
- SSDs
- Spares
- Pools
- Changing pool settings
- Volumes and volume groups
- Volume cache options
- Overcommitting volumes
- About automated tiered storage
- Initiators, hosts, and host groups
- CHAP
- Host ports
- Attaching volumes to hosts
- Operating with a single controller
- Snapshots
- Copying volumes or snapshots
- Reconstruction
- Quick rebuild
- Updating firmware
- Managed logs
- LDAP
- DNS settings
- Peer connections
- Replication
- Full disk encryption
- Rescanning disks
- Clearing disk metadata
- Data protection during failover to a single controller
- SupportAssist
- About CloudIQ
- Event history
- Audit logs
- System metrics
- Dashboard
- Provisioning
- Working with volumes
- Volumes table
- Data protection table
- Creating volumes
- Modifying volumes
- Deleting volumes and snapshots
- Attaching volumes to hosts
- Detaching volumes from hosts
- Expanding volumes
- Rolling back virtual volumes
- Creating snapshots
- Resetting snapshots
- Copying volumes or snapshots
- Aborting a volume copy
- Add data protection
- Creating a replication set
- Modifying a replication set
- Deleting a replication set
- Initiating or scheduling a replication
- Suspending a replication
- Aborting a replication set
- Resuming a replication
- Managing replication schedules
- Working with hosts
- Working with volumes
- Settings
- Maintenance
- Other management interfaces
- Administering a log-collection system
- Settings changed by restoring defaults
- System configuration limits
- Best practices
- Glossary of terms
Dell PowerVault ME5 Series Administrator's Guide
External details for connUnitSensorTable
| connUnitSensorIndex | connUnitSensorName | connUnitSensorType | connUnitSensor Characteristic |
|---|---|---|---|
| 1 | Onboard Temperature 1 (Controller A) | board(8) | temperature(3) |
| 2 | Onboard Temperature 1 (Controller B) | board(8) | temperature(3) |
| 3 | Onboard Temperature 2 (Controller A) | board(8) | temperature(3) |
| 4 | Onboard Temperature 2 (Controller B) | board(8) | temperature(3) |
| 5 | Onboard Temperature 3 (Controller A) | board(8) | temperature(3) |
| 6 | Onboard Temperature 3 (Controller B) | board(8) | temperature(3) |
| 7 | Disk Controller Temperature (Controller A) | board(8) | temperature(3) |
| 8 | Disk Controller Temperature (Controller B) | board(8) | temperature(3) |
| 9 | Memory Controller Temperature (Controller A) | board(8) | temperature(3) |
| 10 | Memory Controller Temperature (Controller B) | board(8) | temperature(3) |
| 11 | Capacitor Pack Voltage (Controller A) | board(8) | power(9) |
| 12 | Capacitor Pack Voltage (Controller B) | board(8) | power(9) |
| 13 | Capacitor Cell 1 Voltage (Controller A) | board(8) | power(9) |
| 14 | Capacitor Cell 1 Voltage (Controller B) | board(8) | power(9) |
| 15 | Capacitor Cell 2 Voltage (Controller A) | board(8) | power(9) |
| 16 | Capacitor Cell 2 Voltage (Controller B) | board(8) | power(9) |
| 17 | Capacitor Cell 3 Voltage (Controller A) | board(8) | power(9) |
| 18 | Capacitor Cell 3 Voltage (Controller B) | board(8) | power(9) |
| 19 | Capacitor Cell 4 Voltage (Controller A) | board(8) | power(9) |
| 20 | Capacitor Cell 4 Voltage (Controller B) | board(8) | power(9) |
| 21 | Capacitor Charge Percent (Controller A) | board(8) | other(2) |
| 22 | Capacitor Charge Percent (Controller B) | board(8) | other(2) |
| 23 | Overall Status | enclosure(7) | other(2) |
| 24 | Upper IOM Temperature (Controller A) | enclosure(7) | temperature(3) |
| 25 | Lower IOM Temperature (Controller B) | enclosure(7) | temperature(3) |
| 26 | Power Supply 1 (Left) Temperature | power-supply(5) | temperature(3) |
| 27 | Power Supply 2 (Right) Temperature | power-supply(5) | temperature(3) |
| 28 | Upper IOM Voltage, 12V (Controller A) | enclosure(7) | power(9) |
| 29 | Upper IOM Voltage, 5V (Controller A) | enclosure(7) | power(9) |
| 30 | Lower IOM Voltage, 12V (Controller B) | enclosure(7) | power(9) |
| 31 | Lower IOM Voltage, 5V (Controller B) | enclosure(7) | power(9) |
| 32 | Power Supply 1 (Left) Voltage, 12V | power-supply(5) | power(9) |
| 33 | Power Supply 1 (Left) Voltage, 5V | power-supply(5) | power(9) |
| 34 | Power Supply 1 (Left) Voltage, 3.3V | power-supply(5) | power(9) |
| 35 | Power Supply 2 (Right) Voltage, 12V | power-supply(5) | power(9) |
| 36 | Power Supply 2 (Right) Voltage, 5V | power-supply(5) | power(9) |
| 37 | Power Supply 2 (Right) Voltage, 3.3V | power-supply(5) | power(9) |
| 38 | Upper IOM Voltage, 12V (Controller A) | enclosure(7) | currentValue(6) |
| 39 | Lower IOM Voltage, 12V (Controller B) | enclosure(7) | currentValue(6) |
| 40 | Power Supply 1 (Left)Current,12V | power-supply(5) | currentValue(6) |
| 41 | Power Supply 1 (Left)Current, 5V | power-supply(5) | currentValue(6) |
| 42 | Power Supply 2 (Right)Current,12V | power-supply(5) | currentValue(6) |
| 43 | Power Supply 2 (Right)Current, 5V | power-supply(5) | currentValue(6) |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\