Dell Precision Mobile Workstation M4800 Owner's Manual

Installing the Palmrest

1. Slide in the palmrest from the front and align it to its original position on the computer.

   

2. Press on the positions indicated until it snaps in place.

   

3. Connect the following cables to the system board:
   1. power button
   2. touchpad
   3. speaker
   4. media board
   5. fingerprint
   6. RFID
4. Tighten the screws to secure the palmrest to the front of the computer.
5. Tighten the screws to secure the palmrest to the base of the computer.
6. Install the:
   1. hard drive
   2. optical drive
   3. keyboard
   4. keyboard trim
   5. base cover
   6. battery
7. Follow the procedures in After Working Inside Your Computer.