Dell Storage Compellent Integration Tools for VMware Administrator’s Guide Version 3.1

To allow Replay Manager to communicate with VMware vCenter, RMSV must be configured with information about the VMware vCenter Server.

1. Log in to CITV.
2. When the CLI appears, type 4 and press Enter.
3. Type the host name or IP address of the VMware vCenter Server and press Enter.
4. Type the user name of the VMware vCenter user with administrator privileges and press Enter.
5. Type the password of the user with administrator privileges and press Enter.
6. Retype the password and press Enter to confirm the password.
7. Type 11 and press Enter. RMSV attempts to connect to the VMware vCenter Server. If a Connected successfully message is displayed , continue to Step 8. If a Connection to vCenter failed message is displayed, verify the server information and repeat the previous steps.
   • NOTE: If a server certificate message is displayed, type y and press Enter to trust the certificate.
8. Add the VMware vCenter Server to Replay Manager Explorer using the host name or IP address of CITV and the user name and password of a VMware vCenter user with administrator privileges.

   Refer to the Replay Manager Administrator’s Guide for details about adding the VMware vCenter Server to Replay Manager.

   • NOTE: Replay Manager management tools (such as Replay Manager Explorer) must be installed on a computer that has connectivity to the CITV virtual appliance.