Vostro 15 3530 Owner's Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Vostro 15 3530.
Component	Screw type	Quantity	Screw image
Base cover	M2x5 Captive screw NOTE:Screws are part of the base cover.	6 2
Battery	M2x3	3-cell battery: 3 4-cell battery: 4
M.2 2230/2280 solid-state drive	M2x2	1
Wireless-card bracket	M2x3.5	1
Fan	M2x5	2
Heat sink - integrated	Captive screw NOTE:Screws are part of the integrated heat sink.	4
Heat sink - discrete	Captive screw NOTE:Screws are part of the discrete heat sink. M2x3	4 3
Touchpad bracket	M2x2	3
Touchpad	M2x2	2
I/O daughter-board	M2x3.5	2
Power button	M2x2	1
Power button with optional fingerprint reader	M2x2	1
Display assembly	M2.5x5	4
Display hinges	M2.5x3.8	6
System board	M2x2 M2x3.5	1 4
RF metal wall bracket NOTE:Only for computers shipped with an aluminum chassis and a 4-cell battery installed.	M2x2	2