Dell Vostro 14–3468 Owner's Manual

Installing the base cover

1. Align the base cover with the screw holders on the computer.
2. Press the edges of the cover until it clicks into place.
3. Tighten the ( 8 screws - M2.5L8; 3 screws - M2L2; 2 screws- M2L2) screws to secure the base cover to the computer.
4. Flip the computer over.
5. Open the display and connect the optical drive connector to the system board.
6. Tighten the three M2L5 screws to secure the base cover to the palm rest.
7. Install the:
   1. keyboard
   2. optical drive
   3. battery
8. Follow the procedure in After working inside your computer.