Dell Vostro 14–3468 Owner's Manual

Installing the touchpad

1. Place the touchpad board into the slot.
2. Replace the four M2L2 screws to secure the touchpad board to the chassis.
3. Replace the conductive tapes.
4. Place the touchpad support bracket into the slot.
5. Replace the three M2L3 screws to secure the touchpad support bracket to the touchpad board.
6. Place the screw support bracket into the slot.
7. Replace the two M2L3 screws to secure the screw support bracket to the chassis.
8. Install the:
   1. system board
   2. system fan
   3. heat sink
   4. speaker
   5. memory module
   6. WLAN Card
   7. hard drive assembly
   8. base cover
   9. keyboard
   10. optical drive
   11. battery
9. Follow the procedure in After working inside your computer.