Przejdź do głównej zawartości
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów
  • Na firmowej stronie administracji możesz zarządzać witrynami, produktami i danymi kontaktowymi firmy Dell EMC.

Dell Vostro 14–3468 Owner's Manual

Installing the display assembly

  1. Align the display assembly with the chassis.
  2. Connect the eDP cable to the connector on the system board and lock the locking tab.
  3. Affix the adhesive tape to secure the eDP cable.
  4. Route the WLAN and display assembly cables through the cable-securing tabs.
  5. Tighten the display hinges three M2.5L8 screws to secure the display assembly.
  6. Install the:
    1. WLAN Card
    2. base cover
    3. keyboard
    4. optical drive
    5. battery
  7. Follow the procedure in After working inside your computer.

Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\