Przejdź do głównej zawartości
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów
  • Na firmowej stronie administracji możesz zarządzać witrynami, produktami i danymi kontaktowymi firmy Dell EMC.

Dell Vostro 14–3468 Owner's Manual

Removing the system board

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. battery
    2. optical drive
    3. keyboard
    4. base cover
    5. WLAN card
    6. memory module
    7. heat sink
    8. system fan
  3. Lift the locking tab to disconnect the following cables
    1. fingerprint reader connector [1]
    2. power button board connector [2]
    3. remove the adhesive tape [3]
    4. lift the locking tab and disconnect the eDP connector [4]
    5. touchpad connector [5]
    6. speaker [6]
    7. I/O connector [7]
    8. hard drive connector [8]
    Figure displaying disconnecting the cables
  4. Remove the single M2L3 screws that secure the system board to the computer [1] and lift the system board [2].
    Figure displaying removing the screw that secures system board to the computer.
  5. Flip the system board.
  6. To remove the system board:
    1. Peel the adhesive tape [1].
    2. Unlock the tab and disconnect the power cable [2].
    3. Remove the system board from the computer.
    Figure displaying removing the system board.

Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\