Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

default-metric

Change the default metric for routes. To ensure that all redistributed routes use the same metric value, use this command with the redistribute command.

Syntax

default-metric number

To return the default metric to the original values, use the no default-metric command.

Parameters

number

Specify a number. The range is from 1 to 16. The default is 1.

Defaults

1

Command Modes

ROUTER RIP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

This command ensures that route information being redistributed is converted to the same metric value.

Related Commands

redistribute — allows you to redistribute routes learned by other methods.